Products Introduction

The valves which operated below -40℃ usually callcryogenic valves. It mainly used in ethylene, liquefied natural gas plants,natural gas LPG, LNG storage tanks, receiving bases and satellite stations,empty Sub-equipment, petrochemical tail gas separation equipment, liquidoxygen, liquid hydrogen, liquid nitrogen, liquid argon, carbon dioxide lowtemperature storage tank and tank truck, pressure swing adsorption oxygensystem.

Design specifications

Design&Manufacture：ASME B16.34；API 602；GB/T 12236；BS 1868；BS 6364；MESC SPE 77/200；MSS SP-134；JB/T 12624

End to End： ASMEB16.10；GB/T 12221

Connection： ASME B16.5；ASME B16.25；HG；GB；JB；JIS；EN；DIN

Inspection & Test ： API 598/BS 6364；MESC SPE 77/200；MSS SP-134；JB/T 12622

Product Features

Valve components parts that contacted with themedia before deep process must be strict cryogenic treatment according to therequirement of the specifications, to ensure valve parts can fully undertemperature change and cause inflation,contraction ,and the structure of seatpart will not have permanent deformation due to the temperature change

Cobalt chromium tungsten carbide overlayingwelding structure of the seat and gate sealing surfaces

The built-in yoke structure, to avoid externalleakage in low temperature medium

Welded nipples is available on request

Low leakage is available upon request. Detailtechnical requirements please refer to the low leakage sample

Main components parts combination

Products Range

Nominal Diameter：1/2"~36"(DN15~900)

Pressure Range ：ANSI/ASME150Lb~1500Lb(PN16~250Mpa)

Suitable Temperature：-196~150 ℃